点击图片查看原图
200 SERIES SPECIFICATIONS
AP-205 and IAP-205 •2.4-GHz (300 Mbps max rate) and 5-GHz (867 Mbps max rate) radios, each with 2×2 MIMO and four integrated omni-directional downtilt antennas.
AP-204 and IAP-204 •2.4-GHz (300 Mbps max rate) and 5-GHz (867 Mbps max rate) radios, each with 2×2 MIMO and two combined, diplexed external RP-SMA antenna connectors.
ADVANCED FEATURES
RF management •Adaptive Radio Management™ (ARM) technology automatically assigns channel and power settings, provides airtime fairness and ensures that APs stay clear of all sources of RF interference to deliver reliable, high-performance WLANs.
•The 200 Series APs can be configured to provide part-time or dedicated air monitoring for spectrum analysis and wireless intrusion protection, VPN tunnels to extend remote locations to corporate resources, and wireless mesh connections where Ethernet drops are not available.
Spectrum analysis •Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference.
Security •With an OpenDNS service sub
•Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys
•SecureJack-capable for secure tunneling of wired Ethernet traffic.
OPERATING MODES
Aruba Instant AP
Mobility Controller-managed AP
Remote AP (RAP) for branch deployments
Air monitor (AM) for wireless IDS, rogue detection and containment
Spectrum analyzer, dedicated or hybrid
Secure enterprise mesh (*Available Q2 2015)
WIRELESS RADIO SPECIFICATIONS
AP type: Indoor, dual radio, 5-GHz 802.11ac and 2.4-GHz 802.11n 2×2:2
Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1)
2×2 MIMO with two spatial streams and up to 867 Mbps wireless data rate
Supported frequency bands (country-specific restrictions apply): •2.4000 GHz to 2.4835 GHz
•5.150 to 5.250 GHz
•5.250 to 5.350 GHz
•5.470 to 5.725 GHz
•5.725 to 5.850 GHz
Available channels: Dependent on configured regulatory domain
Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
Supported radio technologies: •802.11b: Direct-sequence spread-spectrum (DSSS)
•802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
Supported modulation types: •802.11b: BPSK, QPSK, CCK
•802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Transmit power: Configurable in increments of 0.5 dBm
Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements): •2.4 GHz band: +21 dBm (18 dBm per chain)
•5 GHz band: +21 dBm (18 dBm per chain)
Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks
Maximum ratio combining (MRC) for improved receiver performance
Cyclic delay/shift diversity (CDD/CSD) for improved down
Short guard interval for 20-MHz, 40-MHz and 80-MHz channels
Space-time block coding (STBC) for increased range and improved reception
Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
Supported data rates (Mbps): •802.11b: 1, 2, 5.5, 11
•802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
•802.11n: 6.5 to 300 (MCS0 to MCS15)
•802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2)
802.11n high-throughput (HT) support: HT 20/40
802.11ac very high throughput (VHT) support: VHT 20/40/80
802.11n/ac packet aggregation: A-MPDU, A-MSDU
OTHER INTERFACES
10/100/1000BASE-T Ethernet network interface (RJ-45) •Auto-sensing
•802.3az Energy Efficient Ethernet (EEE)
•PoE-PD: 48 Vdc (nominal) 802.3af PoE
DC power interface, accepts 1.7/4.0-mm center-positive circular plug with 9.5-mm length
Serial console interface (proprietary; optional adapter cable available)
Visual indicators (LEDs): •Power/system status
•Ethernet
•Radio status (two; RAD0, RAD1)
Reset button: factory reset (during device power up)
Serial console interface (RJ-45)
Kensington security slot
POWER
Maximum (worst-case) power consumption: 12.5 watts (PoE) or 11.7 watts (DC)
Maximum (worst-case) power consumption in idle mode: 8.4 watts (PoE) or 7.7 watts (DC)
Direct DC source: 12 Vdc nominal, +/- 5%
Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af-compliant source
Power sources sold separately
When both power sources are available, DC power takes priority
MOUNTING
Included with AP: •Mounting brackets (2) for attaching to 9/16-inch or 15/16-inch T-bar drop-tile ceiling
Spare mounting kit: •AP-220-MNT-C1: Aruba AP mount kit contains two ceiling-grid rail adapters for flat rails
Optional mounting kits •AP-220-MNT-C2: Aruba AP mount kit contains two ceiling-grid rail adapters for Interlude and Silhouette style rails
•AP-220-MNT-W1: Aruba AP mount kit contains one basic flat-surface wall/ceiling mount bracket
•AP-200-MNT-W2: Aruba AP mount kit contains one secure flat-surface wall/ceiling mount cradle
MECHANICAL
Dimensions/weight (unit, excluding mount accessories): •150 mm x 150 mm x 41.5 mm (W x D x H)
•380 g
Dimensions/weight (shipping): •190 mm x 187 mm x 57 mm (W x D x H)
•550 g
ENVIRONMENTAL
Operating: •Temperature: 0° C to +40° C (+32° F to +104° F)
•Humidity: 5% to 95% non-condensing
Storage and transportation temperature range: •Temperature: -40° C to +70° C (-40° F to +158° F)
ANTENNAS
AP-204/IAP-204: Two RP-SMA connectors for external dual band antennas. Internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 1.5 dB in 2.4 GHz and 3.0 dB in 5 GHz.
AP-205/IAP-205: Four integrated down-tilt omni-directional antennas for 2×2 MIMO with maximum antenna gain of 4.0 dBi in 2.4 GHz and 6.0 dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP.
REGULATORY
FCC/Industry of Canada
CE Marked
R&TTE Directive 1995/5/EC
Low Voltage Directive 72/23/EEC
EN 300 328
EN 301 489
EN 301 893
UL/IEC/EN 60950
EN 60601-1-1 and EN 60601-1-2
For more country-specific regulatory information and approvals, please see your Aruba representative.
RELIABILITY
MTBF: 711,187 hours (81.2 years) at +25° C operating temperature
REGULATORY MODEL NUMBER
AP-204 and IAP-204: APIN0204
AP-205 and IAP-205: APIN0205
CERTIFICATIONS
CB Scheme Safety, cTUVus
UL2043 plenum rating
Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac
WARRANTY
Aruba limited lifetime warranty
MINIMUM SOFTWARE VERSION
ArubaOS™ 6.4.1.0
Aruba InstantOS™ 4.1.1.0
Technical hotline: one eight nine one five five one five five six six（一八九 一五五一 五五六六）